Buyers 4-Way to 7-Way RV and 4-Way Flat Installation - 2016 Buick Enclave- Video
Hi, John with etrailer. If you're looking for an easy way to have both a seven-way round and a four-way flat trailer connector on the back of your Buick, then check this out. This is the seven-way and four-way connector from Buyers Products that we installed on our 2016 Buick Enclave. So the connector itself is gonna be made out of plastic. It includes a bracket with it. What I like about it is that it's gonna give you seven-way and four-way capabilities back here all in one, and you just can't beat that. more
11/29/2023 8:54:12 AM
Trailer Wiring Harness Adapter Installation - 2014 Buick Enclave- Video
Today on this 2014 Buick Enclave, we're going to show you the adapter, four pole to seven pole and a four pole on the side. Part number: 37185. This is the part we're going to install. You can see it's our seven pole connector and our four pole on the side. This other four pole was adapted from a previously installed 4 pole flat on our Buick. Now, it's going to sit about right here and the already installed hitch, already has a bracket for mounting it. This is our 7 pole bracket. more
9/22/2015 3:46:20 PM
RoadMaster 4-Wire Connector Installation - 2012 Buick Enclave- Video
Today on our 2012 Buick Enclave we'll be installing the RoadMaster 4-Wire Connector for the Vehicle End. Part number RM-910030-1. We're going to go ahead and start here by clipping the zip tie that's holding this four flat to the lower fascia on this vehicle. We can go ahead and snip off the end of the four flat. This right here's the connector that we're going to be installing on our vehicle. It'll connect right to here into the two prongs that come out of the base plate that's been previously installed on this vehicle which is part number BX1513 . We'll be using some hardware that comes with this baseplate to attach this to it. more
4/23/2014 11:20:28 AM
Trailer Wiring Harness Installation - 2003 Buick Park Avenue- Video
Today on this 2003 Buick Park Avenue we are going to install part number 119175KIT from Tow Ready. The first step is to go ahead and open up the trunk and get access to our wiring. We are going to have to remove the threshold and then we are going to have to remove the carpeting in both corners behind the taillights. Ok, here is our wire harness that we need access to right here. Now we can go ahead and test our wires. And to do that, instead of piercing the wires, we can actually test on the inside of this connector right here. So you push down this tab right here on top and it comes apart. Ok, we will go test our pins. Before we do any testing, let us go ahead and install our ground. We use the sheet metal right here. And it is double layered. You can tell by the weld marks here. We will leave that ground in for now. And we will attach our ground lead from our tester and we will probe our wires. 0:52 more
7/26/2011 12:58:00 AM
Trailer Wiring Harness Installation - 1995 Buick Le Sabre- Video
Today on this 1995 Buick Le Sabre we are going to install part number 18172 from Tow Ready. On this vehicle, what is nice about the wire harness is it is run down one side, so all you have to do is pull back the cover and get to the wiring harness. What is nice about all the GM products is it is almost color for color match up. It is always a good idea to double check everything. We are going to need a ground to do that with, so just install a ground screw into the sheet metal right here. :24 more
12/16/2009 8:05:27 AM
Filter Videos
Filter Videos
